Category: Furniture

Avoid This Futon – The Black Metal Futon Frame

When the futon industry was born back in the 1980s, the frames were well thought out and well constructed. Whether it was softwoods or hardwoods, the frames featured good fundamental designs made from solid wood. These futon frames would incorporate new working mechanisms and ideas in operation that made futons appealing not only in their design but in the quality of materials and construction that went into them. The futon industry was doing well and growing with these frames heading into the 1990s but then the black metal futon frame came onto the scene.

At first it was widely regarded as a great addition to the futon family of products. Finally, a futon that could be offered at a much a lower price point. Black metal frames were being imported from China, Malaysia and Taiwan. Many of the early black metal frames were packaged with an import mattress made up of ground up textile materials and a colored covering with tufts. These packages were often anywhere in price from $199 – $249 and started out in specialty futon shops as a great way to introduce customers on a budget into a lower priced futon option. It was soon discovered though that these frames were not such a bargain that they appeared to be.

The first problem with black metal frames is the round metal bars that make up the seat and back sections of these frames. Where as wood futon frames are using flat slats, black metal frames have hollow round bars. Thinner mattresses would slide through the gaps between the round bars. On wood futons this was never a problem. The other issue with the hollow bars is that if enough weight was placed on a spot they would begin to bend. The issue became so bad that a 90 day warranty was put in place by most manufacturers of these frames.

Another issue the black metal frames suffered from were bending stretcher bars or rails. Again the hollow nature of these strecther rails presented issues with breakage and bending. Early designs involved a steel tooth design that would fit into pocket welds on the arms. These would snap off over use. The alternative design was to run a bolt through the arms and into the rails. While better it still did not address the issue of bending stretcher rails.

Bent hinges also added another issue that would happen from use over time. While not as common as the other problems this issue still led to the failure of many black metal frames. The hinges were attached to the arms of the futon frames with two bolts and two nuts. While this design was ok the hinges themselves would fail when too much weight was applied to one side or the other. These would also bend out rendering them useless in the operation of the futon.

Most specialty futon retailers pay little to no attention to black metal futon frames. Retailers Ive spoken to have said that the black metal futon frame is the number one service headache when it came to futons with over 95% of service issues being the failure of a black metal frame component. Replacing these parts were made more difficult by the fact the manufacturers were located overseas and obtaining the parts past the 90 day warranty period often involved the retailer having to purchase the replacement parts and charging the customer.

If youre shopping for a futon, here are some things to think about if you see a black metal futon frame in a mass merchant or big box store. Consider the fact that most solid wood futon frames carry a warranty anywhere from a year to a lifetime warranty. Black metal futon frames have a 90 day warranty. It says something about how much the manufacturer stands behind the product. Black metal frames are made overseas. Expect to wait for a part if something breaks or if youre past that 90 day warranty, expect to pay for all replacement parts and associated costs to get your frame up and running again. Consider too that parts may also no longer be available should something break. Metal bars allow mattresses to slide into and through the gaps between each bar. This puts lumps in your mattress and can make the futon quite uncomfortable when compared to flat wooden slats on wood frames.

Futons do make a sensible investment as they provide all of the features and benefits of a sofa sleeper but at a fraction of the cost in many cases. If you find the right frame that is well built from quality materials and a good mattress your futon experience is sure to be a positive one. Avoid metal futon frames that are made more to hit a particular price point then they are to be a piece of furniture that can offer longevity as a dependable sofa and sleeper for your home. The right futon can provide you and your family with years of quality use. The wrong futon frame will simply become disposable furniture.

Categories: Furniture

Tags: , ,

Why TV Furniture is Now Considered as Mainstream Living Room Furniture

Television units and OLED 3D TV cabinets are now known as a true piece of furniture for the home. A decent LCD TV stand or LCD TV unit not only improves the atmosphere of your home it can also be more practical than a standard table or sideboard. There are now a impressive collection of Plasma TV cabinets and lcd television units from a huge collection of makes, consumers finally have the sort of choice of LED TV furniture as they would if they were buying a coffee table or bed.

The most regular sort of TV cabinet on the domestic market are the plasma television stands made from glass, typically a glass television furniture stand will be made up of 3 shelves, the top shelf is often thicker in order to provide a stable base for a flat panel TV. The 2 lower shelves provide housing for audio and video components but it is important to be certain there is plenty of internal shelf space both in terms of depth and width. Cable management is usually restricted to a rear column.

Glass OLED 3D TV cabinets are now available for very reasonable prices and they do enable a low cost, yet modern solution to housing a LCD TV. Leading brands of glass TV stands include Alphason Designs and Portability both offer very wallet friendly TV furniture with stylish design.

Glass TV stands are highly popular and for some groups of consumers may prefer to own something a little different, in this case a cantilever LCD TV cabinet is ideal. A cantilever TV stand effectively mixes the concepts of a glass lcd television stand and a wall bracket mounted LCD TV into one. A cantilever television bench looks smart in a range of surroundings and can also be a space saving piece of bedroom furniture. With a cantilever TV stand there is simply no requirement to drill into your wall or run cables through the wall, it is simply a much simple and more functional alternative to a wall mounted television. Our favourite makes of cantilever TV stands include Aquila, Alphason and Gecko who offer a unique range of TV cabinets with optional cantilever TV brackets.

When glass television cabinets were first introduced into the market LED TV benches were perceived as old fashioned and suffered a significant reduction in usage, however glass TV benches are now regarded as the standard Plasma TV storage solution and TV Plasma TV styling has also moved forward offering much more modern looking and sleeker cabinet design. The introduction of intelligent darkened glass enables remote control signals to pass through and control AV equipment inside of the bench even though all of the equipment is closed inside the plasma television furniture stand out of view. It is always worth buying a TV bench with some kind of ventilation system to prevent expensive AV equipment from overheating. Ventilated TV cabinets include designs from BDI, Alphason and Gecko.

Categories: Furniture

Tags: , , ,

Furniture Cleanup After Smoke Damage

Fire damage in homes and places of business needs to be taken seriously. Approaching the cleanup after smoke damage wrong, can cost you thousands of dollars in unnecessary expenses. In the event your property was lucky enough to be saved, you will still need additional resources to make the items that were left usable. Couches, chairs, beds, and linens will all have a smoke smell. The smell may seem like something that you can live with. However, trying to live and relax on smoke filled furniture will cause all of your items not tainted by the smoke to smell like a hot furnace.

Contact a fire damage restoration specialist to know for sure what can be done in your business or home. The fire that occurred may have been covered under your insurance policy. Contact the insurance company to see what options they have for you. Part of the fees involved with repair may be offset by your insurance policy. The fire damage restoration specialist can help your furniture cleanup after smoke damage. Trying to repair and clean everything yourself may cause more problems.

A great example of that is trying to clean a smoke damaged piece of upholstered furniture piece. Try to avoid attempting to hand wash or spot clean any area that was damaged by smoke. Cotton or microfiber cleansing cloths that do work on regular upholstery for spot cleaning may simply only mask the appearance of the smoke damage. The furniture will still smell like smoke. Any company you invite who sites on the couch, will acquir the smell of the smoke damaged chair. Using a professional steam cleaner may not obtain the long term results that you want. The smell initially may go away, however the padding that is inside of the couch, may hold onto the smell.

If you take large drapes, curtains, and slipcovers to a professional dry cleaners their plain solution may not eliminate the smoke smell. Trying to do the furniture cleanup after smoke damage alone can cause you to pay more money than necessary to repair your furniture. The fire damage restoration specialist can give you a detailed list of everything that is salvageable. That way you do not waist time trying to repair things that are ruined.

The furniture items that can be repaired, are were you should direct your resources to. There may be several family heirloom pieces of furniture that may have been ruined in the fire. Take detailed pictures of items that are not salvageable. These pictures can be used to search for similar furniture pieces to replace them at antique shops, ebay, yard sales, estate sales, and storage auction sales. Use these tips to help with furniture cleanup after smoke damage.

Categories: Furniture

Modern Furniture Shopping Tips – Getting The Best Deals In The Market

There are plenty of modern furniture designs in the market today and you need to pick the right one if you want it to look good inside your home, as well as making sure that you won’t ever regret the purchase. Homeowners might want to take advantage of these tips to get the best deals in the market.

Tip # 1: Planning The Purchase

I think every homeowner would agree that getting best deals in modern furniture is to get the right one that fits your home improvement project at a price that fits your wallet. Such is the case; it is best to plan for the purchase so that you can get the perfect furnishing that compliments the theme of your home, as well as cater to your need for comfort and convenience.

Start by planning for the type of furniture to purchase, as well as its specific details or attributes — such as the size, the color, materials used, design, and price. It is also a good idea to determine where you will be placing the modern furniture so that you can pick out a design that fits that part of your home.

Tip # 2: Check The Market First

It is a good idea to check the market beforehand on the selection of modern furniture to know what you’re up against. Your goal here is to get the right one that fits the theme of your home and the amount for the investment. Visit different furniture shops or home depots and list down selections that fit your specifications. You might also want to try scouting furniture sites on the Web for better offers.

Tip # 3: Wait For Discounts

Homeowners might want to wait for their favorite furniture shops or sites to offer discounts on some items under their selections. It might be a good idea to ask the store in advance if they are planning to go on sale in the future so that you can prepare your funds in advance for the purchase.

William W. Teho, Jr.
Modern Furniture

Categories: Furniture

About How To Purchase Cabinets To Go

Everyone would like to have a very kitchen seems awesome and another of the most important furniture pieces individuals will need to consider effectively is the cabinets to go. The cabinets are not only a necessity, but they will genuinely become the principal portion of the room and will arrange the tone for the entire decor style. For people who want to purchase new ones and don’t discover how, this can be a little tricky, yet with the proper instructions, are going to capable of decide effortlessly and buy some great cabinets. Listed here are the methods to doing this.

1. First of all individuals will need to set the cost for their kitchen cabinets and they have to keep in mind that their cabinets will account for fifty percent with their budget.

2. The next thing is to look at the kitchen. The height of the ceilings and the ground proportions will have to be written down, because these numbers will help buyers obtain the best layout options from other supplier.

3. At this point people will desire to make a wish list of functions they would love their cabinets to return with, like a fitted wine rack or maybe shelves for pans.

4. There are many alternatives when it comes to buying cabinets to go and so they quantity the stock kitchen cabinets, the semi-custom types and lastly, the custom cabinets. When it comes to the stock cabinets, those are the most affordable of the bunch plus they are stated in normal dimensions are available in a small group of coatings and styles. The semi custom ones may also be made in standard sizes and come with different style choices and storage area features. Also, the custom cabinets are created so that they will appear exactly as the consumer wants them to look. In the end though, the clients’ budget will decide the type of cabinets they’ll afford obtaining.

5. Those people who are undecided and would really like an additional opinion around the kind of cabinets they need to buy, need to check out a home improvement center and ask the sales rep is heshe can suggest them, depending on their budget, some cabinets to go that will fit their kitchen very well. For additional ideas, they might also check out the catalogs in the store.

6. To produce a much better choice, customers will have to look into the different cabinet designs within the store to be able to limit their choices. This can be done if they will think about the ones that will work best with their home’s dcor and architecture. Because of the fact that cabinets to go can be bought in stained wood finishes, painted finishes, but additionally laminate and natural finishes, the chances of choosing the best cabinets are wonderful.

7. Finally, people can arrange for a salesperson from your store to see their house and enable them to with exercising a plan because of their cabinets. This helps with making sure that clients will select cabinets of the right size.

If it is all totally ok up until this time, based on the layout the client has chosen, the order can be confirmed. Everything that remains is for the delivery date to be arranged and also the payment to be produced.

Categories: Furniture

Elegant Antique Fine Furniture Store

It takes a special individual to realize the historical distinction that only an antique piece of furniture can represent. Like a fossil that has seen centuries of generations pass and still able to retain a soft smooth texture, preserved by nature itself, all furniture has a story to tell if you take the time to listen.

Restoring an old chair or dresser that has been placed in an auction as an

afterthought can be that dream piece that speaks of a past where families have shared intimate moments, seen children born and married and watched a loved one die at the end of the century-old day. You can feel the pulse of activity taking place in the tired looking piece and yearn to bring it back to life.

Carrocel Restorations is a company located in Toronto that shares your passion for antiques and wanting to rejuvenate life to each piece that is brought in. Only artisans with extreme knowledge of wood and vintage furniture are given the honor of refreshing a battered but loved item in the confines of a first-class work shop where every step is taken with skilled hands.

Over ten steps are taken in taking wood furniture down to the bare wood and building back up to a lustrous shine that identifies it with an era so long ago visited. You will never find the skilled team of Carrocel using chemicals or machines for heaving sanding in an effort to save time. Hand stripping, hand staining and hand finishing are regular features of all fine furniture antiques that are brought to Carrocel.

One of the main differences of the process is the sanding and rubbing that takes place between each coat of the finest clear coat lacquers found anywhere. But before this is allowed to happen, the staining process accentuates the grain of the wood, giving definition and highlighting areas of beauty. By the time your tired looking antique is finished, it will be hard to not think of it as a living, breathing member of your family. Placed in just the right spot in a home, the antique furniture piece will once again be proud to stand watch over a home filled with love.

Carrocel Restorations also does repairs, using only quality pieces to stay within the furniture’s period style. Re-upholstery for chairs, settees and couches are also designed with fabrics found around the world to add just the right flair and modifications can also be trusted to the experienced staff.

The next time that you see an old chair or wood dresser and hear it moan with age, listen to its story and call Carrocel to add life to your home with a gorgeous antique piece that will never run out of stories of the past.

Categories: Furniture

Tags:

Am I Buying The Right Size Dollhouse Furniture

There are many different scales in dollhouse furniture it is a wonder how we can keep it all straight. This article talks about some of the different scales of dollhouse furniture and how you can know what size is right for you.

Is Inch Scale the right size for my dollhouse?

Dollhouse scales are a way for you to know that the furniture you are buying will fit your dollhouse. On this website, all furniture items are on a 1 inch scale unless the title of the item says otherwise. The most popular scale for both furniture and dollhouses is the 1 inch scale.

The most frequently used scale for dollhouses and dollhouse furniture is the 1 inch (1:12) scale. Each inch of dollhouse furniture represents a foot of real furniture. For example, a dollhouse tub 5 inches long is built to represent a 5 foot real tub. In other scales, such as half inch and quarter inch, less than an inch represents a foot of real furniture.

For example, a dollhouse dresser that is 4 inches tall represents a 4 foot tall real dresser. There are other scales, but they are less popular and common

Dollhouse Scales: Quarter Inch

Dollhouse scales tell you that the you are buying the right sized furniture for your dollhouse. On this website, all furniture is built on a 1 inch scale unless you see inch or inch in the title of the item.

This item is built on a quarter inch, or 1:48 inch, scale. This means that an inch of dollhouse furniture represents 4 feet of dollhouse furniture. For example, a dollhouse dresser that is 1 inch tall represents a 4 foot tall real dresser. In other scales, such as 1 inch and half inch, different sizes would represent that same dresser. If you do not know the scale of furniture you need for your dollhouse, use a ruler to determine the floor-to-ceiling height on the bottom floor of your dollhouse. A good way to determine which scale to use for your dollhouse is to measure the floor-to-ceiling height of your dollhouse.

If it uses a half inch scale, the height will be from 4 to 6 inches; quarter inch scale dollhouses have heights of 2-3 inches.

Is Half Inch the right size for my dollhouse?

To make sure you are getting the right sized item, check the scale of the furniture. All furniture is built on a 1 inch scale unless you see inch or inch in the title of the item.

This item is built on a half inch, or 1:24 inch, scale. This means that half an inch of dollhouse furniture represents a foot of dollhouse furniture. So, a 3 inch dollhouse sofa represents a 6 foot real sofa. Other scales include the one inch (1:12) and quarter inch (1:48) scales.

If you are not sure which scale your dollhouse corresponds to, simply measure the height from floor to ceiling on the 1st floor of your dollhouse. If it is between 8-12 inches, it is most likely a 1 inch scale. Heights between 4-6 inches indicate a half inch scale; heights between 2-3 inches indicate a quarter inch scale.

Categories: Furniture

Vs 316 Stainless Steel

When first discussing the differences between 304 stainless steel and 316 steel we must first understand what stainless steel is. Stainless steel is always made using chromium. The minimum amount of chromium used to make stainless steel is 10.5%; it is chromium that makes the steel stainless. Chromium also improves the corrosion resistance by forming a chromium oxide film on the steel. This very thin layer, when placed under the right conditions, can also be self-repairing.

Other elements used to make stainless steel as well, including nickel, nitrogen and molybdenum. Bringing these elements together forms different crystal structures that enable a variety of properties in machining, welding and forming.
There are four major types of stainless steel. The first and most widely used is austenitic It has a nickel content of at least 7%, which makes it very flexible. It is used in a range of houseware products, industrial piping and vessels, constructional structures and architectural facades.

Ferritic stainless steel has similar properties to mild steel, but better corrosion resistance. This type of steel is commonly used in washing machines, boilers and indoor architecture. Martensitic stainless steel is a very hard, strong steel. It contains around 13% chromium and is used to make knives and turbine blades.

Finally, there is also a duplex stainless steel that is a composite of austenitic and ferritic steels. This steel is both strong and flexible. Duplex steels are most commonly used in the paper, pulp and shipbuilding industries. They are also widely used in the petrochemical industry.

Grade 304 is the standard “18/8” stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products including stainless steel tables, cabinets and more , forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.

Grade 316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. Grade 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.

Categories: Furniture

Tags:

Tips To Prevent A Woodpile Pest Infestation

Despite advances in technology and electric heating, wood-burning stoves and fireplaces have not lost their charm or popularity. Unfortunately, the firewood used to fuel them sometimes carries hitchhikers that can infest your home.

When improperly stored, firewood can pose a serious pest control problem for homeowners. To prevent wood-destroying pests from taking up residence in your woodpile and migrating to your home, it’s a good idea to implement some proper storage and pest prevention techniques. Here’s a look at common woodpile pests and how to prevent them.

Common Firewood Pests

Termites. Termites generally make their nests underground, where the queen lives. They burrow into the wood to feed on it and then bring it back to the nest. However, if you bring firewood infested with termites into your home, you will introduce these insects to a buffet of wooden goods they will devour. If you notice small tunnels of mud on or within logs, you may have termites in your firewood and should consult a pest control service.

Carpenter ants. Freshly cut wood that is still moist is the preferred home of a carpenter ant. While they do not eat wood, they will burrow holes in it to create a nesting site. These holes are smooth and follow the grain. Unlike with termites, if you introduce carpenter ants into your home by bringing in infested firewood, the chances of an infestation are not very high, depending on the season, because these ants do not like dry wood. However, your home is more vulnerable during the holidays if you have a freshly cut Christmas tree.

Flatheaded borer beetles. Flatheaded borers, also called metallic woodborers, are not picky about the type of wood they eat. They attack trees that are weak, dying and alive. Flatheaded borers lay their eggs in the crevices of tree bark, and the larvae tunnel under the surface the bark. These beetles prefer forest, shade, fruit and birch trees. While flatheaded borers are not known to destroy a home, they may lay eggs in decorative birch logs.

Powderpost beetles. Adult powderpost beetles enjoy making homes in dried and seasoned wood, as well as in dead wood. These beetles will eat both soft and hard woods and are known to destroy woodwork, wood flooring, furniture, tool handles, structural wood and firewood. The exit holes they create are 1/16 to 1/32 inches in diameter and are often surrounded by a powdery substance.

Carpenter bees. While carpenter bees do not generally infest structural wood, they are known to bore holes into fence posts, outdoor wooden furniture, railings and other wood that is weathered. Carpenter bees look like bumblebees, and they prefer wood that has some moisture.

Woodpile Pest Control Tips

To discourage pests from nesting in your woodpile or entering your home, utilize these pest prevention techniques when storing or transferring firewood.

1. Stack firewood off the ground. This easy pest control strategy helps keep wingless insects away from your woodpile. When you stack firewood on the ground, it absorbs and holds moisture, which can consequently attract a wide variety of pests. Consider making a simple firewood rack by placing a 2-by-4 length of wood across stacked cinderblocks that are at least 10 inches high.

2. Stack firewood away from the home. Keeping a woodpile next to your home provides easy access for pests to enter your abode. If your woodpile is stored next to your home and you suspect a termite infestation, call a pest control service as soon as possible.

3. Cover your woodpile. If possible, store your firewood under a roofed area, away from any other structures in your yard. This keeps the rain off and helps the wood remain dry. If you do not have a roofed area, you can cover your woodpile with a sheet of dark polyurethane plastic.

4. Cut your firewood into smaller sizes. This will accelerate its drying and is an easy pest prevention technique.

5. Only bring the firewood you immediately need into your home. Insects or eggs in the wood that remain dormant in cold weather can become roused within the warmth of your home. If left to sit in a pile by the fireplace, they could decide to explore and potentially infest the area.

6. Do not spray insecticides on your woodpile. Insecticides may contain volatile chemicals or release toxins into your home when you burn the wood.

When it comes to your woodpile and pest control, the trick is to create an inhospitable environment for wood-loving insects. However, if you believe insects have invited themselves into your home, do not hesitate to contact a pest control service.

Categories: Furniture

Tags:

A Strategy For Moving House In 2010.

In this article, I’m eager to give out some real help to folks who find the complete option of packing for moving residence slightly overwhelming. You’re probably dreading the concept of having to decide where to start and what to take, so let’s set up a step plan for you to adhere to, and I think, after you take the initial step, you’ll understand that just getting going is the highest hurdle you’ll cope with.

Step 1: The Big Clear Out.

This sounds like an obvious step, but from my experience, it’s overlooked all to often. An opportunity has arisen at this time where you can get rid of a bunch of garbage and open up a quantity of valuable breathing space, and decrease your workload and expenditure on removal day. This is especially critical if your move is over a long distance, or if there’s going to be a storage phase connecting your moving out and moving in days. Remember, the higher the volume of goods to be moved, so therefore the more packing resources, men necessary, time necessary, superior vehicle necessary, bigger storeroom unit necessary. It all has a knock on effect, so strip your residence down to the essentials and save your time and money. Take a good long look at your furniture, and ask yourself if you really intend to shell out to have that worn-out old couch taken to your pristine house. Are your beds or mattresses due for replacement? Do you really need to keep all those back issues of your favourite magazines? A clever proposal is to ask yourself when was the previous point you used that thing, and force yourself to cast it away. Use it or lose it. Get this step correct by being as brutal as you can, and you’re on your way to a much smoother, and much cheaper move.

Step 2: The Non Essentials

We all obtain those items which we can’t be parted from, such as private photo albums, ornaments and trinkets, artwork, and of course our clothes and cookware, but for a good number of us it can be packed, weeks in advance of moving time without impacting on our lives. If you can cut back down to manage on the bare essentials, and box up the surplus ahead of time, you’ll suddenly observe that the workload on moving day is now down to a much more controllable level. If you can get this stage concluded before you call in the removal companies for quotes, it follows that you can expect the prices to be much more reasonable. The sales rep from the moving company will respond far more favourably to a tidy organised household, than he would to a jumbled residence with a mountain of graft to get through. So work ahead of time and box up the things you can manage without. Don’t be troubled too much as regards what goes away on this stage, as you can leave your boxes unsealed in case you need to find that special pair of shoes or your kids other toys. Stack your packed boxes to the wall in each room, ready to seal them up right before moving day.

Step 3: The Night Before

Relax. With steps one and two complete you’ve already prepared much better than nearly all. You can award yourself a pat on the back at this moment and know that your moving day is going to plan. Now, all that needs to be done is to place everything in your essentials collection which is no longer required into the unsealed boxes. You’ll need fresh clothes, wash kit, a couple of towels and the breakfast items for the morning, but everything else can go away. My special reminder is to keep the coffee pot out and a few mugs and teaspoons, milk and sugar. We all have a mid-morning break on the day and it’s so much nicer to enjoy a cup of tea or coffee. Especially imperative at this time, is that you get a sound nights sleep. Moving day is a long day so catch your rest and wake up refreshed and energised ready to rock and roll.

Step 4: Get up and enthusiasm!

If your movers are coming by 8am, it follows that you’ll aim to be up, washed, dressed and fed earlier than they arrive. Then you’ve got to get the breakfast dishes washed dried and packed, get the wash kit away, but leave a towel and a little soap in the bathroom. Strip your beds down and bag the sheets, pillows and duvets. Seal up all the boxes which have been left unsealed up to this stage and presto, youre all set. When the movers arrive, thay can move straight to work lifting boxes away to the van while you polish off a small amount of last moment tasks. Once your boxes and furniture are moved out, you’ve got to turn out the lights, lock up, transfer the keys and get after that truck.

Hopefully at present you’re looking forwards to moving. I know as soon as I arrive on nearly all jobs, a look of absolute panic is showing, but generally by the mid morning break we’ve got the bulk of it finished and things calm down. If you take my advice and abide by the plan then you to will be able to sleep well the night beforehand and welcome your movers with a smile.

Warmest regards from me, and let me know how it went.

Categories: Furniture