Ideas on How to Enhance Your Kitchen Design with Beadboard Wainscoting

Learn about how wainscoting can add that finished touch to your new kitchen.

Beadboard wainscoting is often associated with older homes, especially since its been around since the 1600s, and was originally used to protect walls from damage. It can be found in any room of a house, from bathrooms to hallways to kitchens, where it can cover all or part of the walls. It can be distressed, stained, painted, or even left in its natural wood tone. With so many options, beadboard is a great addition to your kitchen, whether you choose it as an accent or install it more liberally.

What is Beadboard Wainscoting?

Beadboard consists of tongue and groove strips of wood that are fitted together and nailed along the wall. The bead, or indentation, that runs between each board is what defines beadboard. This bead can be various widths, depending on the width of the boards themselves and the type of beadboard you purchase. Beadboard wainscoting generally goes partway up the wall, although beadboard can certainly be both vertically or horizontally over the entire wall, if desired. Traditionally, it is placed vertically with a decorative chair rail and molding along the top and bottom, framing the beadboard wainscoting along the wall.

Although real beadboard is tongue and groove and comes as separate boards, you can purchase sheets of beadboard at lumber yards or home improvement stores. They are available in primed and unprimed, pine, oak or a composite. Its best, for authenticitys sake, to choose a real wood product. If you plan to paint the beadboard, pine is the most cost-effective, and primed options will save you a step. The real wood also looks more realistic than the composite sheets.

Beadboard Wainscoting in the Kitchen: Where Should it Go?

There are several ways beadboard wainscoting can enhance your kitchen. It can be a focal point or an accent, depending on your taste. For example, if you want it to be a focal point, you can choose to reface your kitchen cabinets with doors that feature a beadboard center. You can also make beadboard wainscoting you backsplash, both of which help draw attention and will define your kitchens style.

For a more subtle approach, consider adding beadboard wainscoting to the outside of your kitchen island or put it along your walls, especially if you have a large, eat-in kitchen that will show-off your beadboard wainscoting addition. If you have a built-in seating, such as a banquette or bench seat, perhaps beneath a window, consider facing it with beadboard wainscoting for a cottage feel.

Finishing Options for Beadboard Wainscoting

Beadboard wainscoting does not have to be white, but can be painted to complement your existing kitchen color, perhaps a darker shade if you plan to put it on the wall or highlight seating. You could distress it for an aged, antique look or you might stain it, especially if you plan to use it on cabinet doors or along the outside of a kitchen island, although a painted finish will work well here as well. Of course, if you prefer its natural color, simply apply a clear varnish to it to preserve it and make it shine.

Tips to Cut Down your Electricity Bill

Need to cut down on your home wasted expenses and economize more money? As an online LED lighting store in Australia, we will give you some tips to start saving on electricity. Many small details can be fixed to minimize your electricity bill, all you have to do is to change some of your habits. The following tips dont only let you save money, but also protect the environment:

Replace incandescent and halogen light bulbs with energy saving LED light bulbs: For the time being, the most common type of lights used to save energy is the fluorescent light bulb. Lately, LED light bulbs have started to pick up too; they are up to ten times more effective than fluorescent lights, and way more energy efficient than the conventional lights. Whereas, conventional lighting – like incandescent and halogen lights- contains mercury and other toxic substances, LED lights are made of non-toxic materials which make them 100% recyclable and harmless for the environment. So, go to the nearest LED lighting store or order them online to replace all your ceiling lights and bathroom lights with LED lighting products to save energy.

Prevent power loss by switching off power points when electronics are not being used: plugged electronics, even when turned off, keep on consuming energy without your knowledge. For example, up to 30% of power used by TV is consumed when it is turned off. Therefore, to prevent losing energy and money, better to unplug it from the electricity outlet when not in use. Even when using LED lighting, which is the most efficient lighting solution, make sure the lights are off during the day and every time you exit a room at night.

Turn non-essential electricity off when on holidays or away: This tip is close to the previous one, but on a larger scale. When you are on holidays or out of town for business or on any other occasion, many electronic devices are not essential to keep turned on, so unplug them. The only thing you can actually leave plugged is the refrigerator, but only if its full of stocked food.

Make the most out of only one LED light bulb per room: on many occasions, we can see a room with many light bulbs to optimize the lighting experience. However, each room needs only one LED light bulb to fully illuminate it, depending on the light output of each bulb. The latter notion is called lumens/watt, which tells you how efficient the LED light bulb is. On the other hand, several bulbs in one room mean a bigger consumption of energy. Heres a trick on how to maximize your lighting using only one LED globe or LED spotlight: paint your walls with white colors this color reflects the light from the LED light fixtures more than any other color causing a better brightness.

Those were some of the many other things each and every one of us could and should apply at home to save on electrical energy and contribute in protecting the environment. Replacing the conventional lights with saving energy LED light bulbs and switching off non-used electronics can make you save on your electricity bill. So act fast, save energy, save your money and protect the environment.

How To Lower Your Air Conditioning Costs

Whether you live in the deep south or the northeast, you probably have to blast your air conditioning system all summer long to keep cool in your indoor space. Having a properly running AC is essential to staying cool and comfortable throughout the hottest months of summertime. Even if you have a top of the line, brand new efficient system, you energy costs can still be high. However, there are several simple steps that you can take right now to lower the cost of cooling your house.

In order to keep your energy costs down, efficiency is a key component of the process. The more inefficient your HVAC system is, the more money you are going to spend on your monthly bills. One of best ways to maintain an efficient air conditioning system is to regularly replace the filters. Dirty filters will decrease the airflow necessary to cool your home, causing your system to be far less efficient than necessary. Filters are inexpensive, and they should be checked monthly and changed at least once every few months.

Replacing your thermostats with programmable options is a great way to cut down your energy costs while keeping your home perfectly comfortable. While manual thermostats allow you to control the exact temperature in your space, automatic ones give you total control over your system. You can save by programming the thermostat to turn off the air conditioning when you won’t be home, and you can set it to turn back on an hour before you arrive.

If you have the opportunity to get a new system installed, look into energy efficient air conditioning systems. There are a variety of models on the market systems that are designed to use much less energy than other options. If you are outfitting your home with a new system, or you already have an inefficient system installed in your home, consider using a window unit. If your system seems to cool some rooms efficiently while leaving other parts of your house stuffy and hot, a window air conditioning unit can help to cool single rooms at a time. This way, you can conserve energy by not needlessly cooling rooms you are not occupying.

Home Moving Tips

Moving house is a tiresome task, especially office goers and busy people find it very difficult while shifting home from one place to another. Corners of furniture can get chipped off while moving and to avoid this you must be well aware of packing all your household items safely. Best moving company Lincoln Park help you to shift it with much ease, however here are few tips that would help you to move home with much ease. Whether you pack your furniture and household items by yourself or with the help of professional movers, these tips would be highly helpful.

Plan everything before you move

Before you start moving you need to plan everything as this could avoid mess at last minute. Decide the date you are planning to move well in advance so that you get adequate time to pack all your things. Have a check list as this would help to move things without much difficulty.

Make a complete list

To avoid missing things you can make a complete list of the things you need to move. List things with priority and give more preference for expensive and heavy things. Next thing is to create label, you can fix it on the boxes and this helps to identify the things inside it more easily. For example, if you are having kitchen utensils inside a box then you can fix a label as utensils outside the box. When you arrive at the new home you wont feel difficult to find any things. You can easily find them by just looking at the labels fixed on them.

Tips to move furniture

Furniture can be easily moved by dismantling them, but make sure to keep all the nuts, bolts and screws securely in a bag or small cover as it is difficult to get the original accessories. After dismantling, wrap them with a bubble top cover or something else to prevent it from breaking as well as from scratches. Furniture pads can also be used to safely transit furniture.

Tips to move electronic goods

Electronic goods need to be transported more securely so it is good to transit them in original boxes. You can also mark on the side of the box with electronic goods so that is visible for the movers.

Tips to move home appliances

When you transit home appliances you need to handle it carefully otherwise it can go wrong easily. Read the packing instructions available in the owners manual before you start packing.

Affordable moving company Lincoln Park helps to shift your home at a reasonable cost. Best moving company Chicago will help to perform everything right from packing to moving all the home appliances safely without single damage.

Simple And Impactful Home Renovations

If you’re looking for door handles Australia, you don’t have to leave the comfort of your computer. There are now plenty of home improvement merchant sites online. Now you can shop for all your home renovation needs online. A new dimension of warmth can be bought in my making fresh changes to a home. At initial thought one might be hesitant to make such changes because the costs might seem daunting. Small subtle changes can make good impact so you don’t have to be spending so much at a time. Changing things like the drapes, lighting, upholstery, door knobs, taps, and such won’t cost you a burden but can bring about that much needed change. Making such changes truly are refreshing and can rejuvenate a tired spirit. These simple changes might just be what you need whether it be out of necessity or preference. If your budget is tight, get creative with things like lighting. You can also reduce costs by making small changes at a time.

These little home details like taps and doorknobs come in so many varieties. You can browse brass, chrome, satin chrome, antique copper, antique brass, iron, glass, crystal, ceramic, and porcelain door handles Australia that can be designed in the form of Art Deco, Victorian, Edwardian, and French styles. You might also like to consider internal locks, external locks, euro locks, French doors, patio bolts, rim locks, and deadbolts. Faucet taps also come in a range of designs. To save you from the hassle of having to fit and remodel fixtures at home, make sure that the items you select are already compatible in terms of size and such.

Ash Separator (Ash Can Filter)

Cleaning ash is both messy and dangerous. Naturally, homeowners might think of using a regular vacuum as a solution, but that would be a big mistake. Regular vacuums aren’t suited for this particular task and for some very good reasons.

The first and most obvious reflects the danger involved. Hot sparks and embers can endure for a long time while hidden in cool dust. When regular vacuums inhale them, paper filters catch fire and plastic melts. This is not a good thing.

Another reason is due to lack of containment. Particles pass easily through regular filters. An excess of fine dust leaves that lingering ashtray smell in the air and gray film on furniture, causing users to gag and experience that sticky icky feeling. Homeowners spend time and money cleaning their homes afterward. That’s too much aggravation.

Yet a third reason deals with debris that clogs vacuum bags and filters. Packed dust and other particles restrict the inflow, cause backup and weaken the suction. Users are left cleaning out their vacuums every few minutes.

The most critical reason why regular vacuums are insufficient, however, is that debris hinders performance, slowing operation over time. Fine dust and burning embers clog and damage the motor, causing irreparable damage. This is akin to an embolism going into the brain. Death can occur. Vacuums are no different.

The current market has two options for cleaning ash: the ash vacuum and the ash can filter also called “ash separator”. These two are not the same, but both guarantee impressive results.

Ash vacuums are designed to pick up cold or warm ash from fireplaces and stoves. They are constructed with fire-resistant materials and have a pre-filter cage for added protection. Their metal nozzles and steel canisters ensure that potentially dangerous debris is picked up and stored away safely and without a mess.

Ash can filters, on the other hand, have no motor but are reinforced with metal and are extremely durable. They require a connection with a regular vacuum for suction power, although this connection can be notably poor and the suction weak due to the ash filter’s internal capacity and clogs do occur on occasion. What makes them worthwhile is the fact they have a spark arrestor screen pre-filter to deflect hot sparks, smoldering embers and other dangerous particles. Ash can filters inhale only cooled fine ash, so their capabilities, though limited, are specialized.

By the way, ash vacuums run anywhere from $100 to $300 or more, depending on the brand and make.

Ash can filters fall in under $100, so buyers save some money on the latter.

New Year. New Life. New Home

The start of a brand new year usually means the start of a brand new phase in peoples lives. It is an opportunity to start again, reinvent or simply try something new. I, for one, have a sudden liking for a change of environment. And since it would be a financial impossibility to find a new place, I decided to redesign and do a bit interior painting on my own space instead. Now, if you are just like me, here are a couple of tips on how to find just the right colors to fit your home and your whole new you.

Colors are not just about a change of atmosphere. It would be a good idea to change your room colors according to a type of mood youd like to inspire. Shades of red and oranges promote excitement and energize, youd want to use these colors for your social and entertainment rooms. Yellow is also an active color that stirs up imagination and creativity. If youre going for a calmer quiet atmosphere, passive colors are the way to go. Shades of blue, purple and green would be great for bedrooms and bathrooms.

Its important to go with colors you like. Getting peoples advice about what suits your home is important but if its you that would be living in your home, not them. So make your opinion your number one priority.

Keep it simple as much as possible. Too many colors can be overwhelming, especially when were talking small spaces. Sometimes its okay to stick with one color and go with different shades for variety. Also, when painting your wall, its great to pick a color or shade that goes with almost anything. Think of it as a canvass you can splash with accents such as furniture, portraits and lighting to create a grand picture. When you are repainting an old home, go for a flat sheen. This type or paint hides the imperfections of aged spaces.

Faux techniques can be helpful when you want to add a bit of depth. Sponging, colorwashing, dragging and other techniques can be quite handy. If youre not a painting contractor and youre not familiar with them, practice on a different surface and experiment with colors before applying it on to your home.

Remember to not just consider the color of the paint, the shade or the style. Dont forget that you would still need to add your homes other fixtures to the project. Keep in mind that balance is everything. Create an environment where everything can go together without resulting into a chaotic room filled with contrasting styles.

Now when it comes down to it, repainting a home can be quite a chore. But dont forget while you are doing it in the first place. Take time to enjoy every moment of this transformation. Include your kids in the project and make it an opportunity to teach and spend some quality time with them. When all is said and done, you wouldve made a fun and inspiring journey into a whole new beginning.

Flood Restoration Guide

These rules are expected to help with the results of Flood restoration. It manages prompt issues, mid and long haul restorations and reclamation. A house is generally an individual’s biggest venture. There is regularly a passionate connection to the house which needs to be thought seriously about amid the rebuilding and repair process.

Overview

Being a hit by a flood in person is a traumatic experience and the flood restoration doesn’t make it any easier. Prompt concerns are regularly whether the harm is secured by protection, whether to live in the property meanwhile and so forth. This rule identifies with the rebuilding and repair work just.

Before beginning the clean-up, watch that the property displays no impending threat to inhabitants or others cleaning up. This will imply that:

The force supplier has either cut the force supply or watched that the supply and establishment is sheltered. Gas and electrical apparatuses, gadgets and administrations will need to be independently checked and labeled as sheltered or disengaged.

The sewage framework is sheltered and exhibits no wellbeing danger to laborers amid the cleaning operation. It is a decent thought to take photographs of the harm and any things being discarded, particularly if this must be done before the holder’s insurance agency has an opportunity to investigate.

A few houses can be existed in while the reclamation and repair work is consistently completed. A few houses will be empty, which will consider stripping out, drying out and reclamation without needing to consider the manager’s fleeting living necessities. A few houses will need to be part of the way stripped out and made safe for inhabitance before full reclamation. A house can be existed in when:

Living there won’t constitute a well being or danger

The starting clean-up of water, mud, and trash is finished

The force supply has been securely restored

All wellsprings of consumable water supply and sewage frameworks have been checked, repaired if essential, tried and announced safe for utilization.

Halfway evacuation of divider sheeting may be obliged to permit the encircling to dry out. Uncovered divider confining needs to be sheltered, nails and fragments need to be evacuated, electrical plugs made safe, and any uncovered electrical wiring solidly cut in position and confirmed by an electrical builder before work.

Conclusion

Prior to any divider linings are supplanted a dampness meter ought to be utilized to determine if the confining dampness level has dropped to a suitable level. Plasterboard fixers ought to guarantee dampness levels are to the standard for the producer’s item.For cement floors, the most solid test for dryness is a deck hygrometer. In the event that one is not accessible, the accompanying system will give a general sign of the dampness level. On the off chance that build up structures on the underside of the polyethylene the floor is excessively clammy for laying vinyl or rug with elastic underlay or support. Lift the polyethylene, and if the floor is excessively wet spot an alternate piece in a couple of days (don’t leave the piece appended to the floor). Hold up until polyethylene taped set up stays dry for two to three prior days laying the floor covering. That’s all for Flood Restoration.

During an emergency fire cleanup Largo FL services, contact ZippyRestore local providers as they know how to work fast and in specific manner to clear every piece of trash remain after the fire.

The complete renovations of the bathroom in Maryland

It can be seen that most of the bathrooms in Maryland are completely renovated and they are extremely beautiful to look at. The installation mechanisms are done with some of the modern techniques and they are extremely useful as far as the modern innovations are concerned. The home improvement companies give special importance to the bathroom renovations. Introduction The bathroom renovation MD companies are specialized in the bathroom renovation materials and they can give the bathrooms a superior look. The bathroom vanity installations are another work which is done by the technicians in Maryland and it can be said that most of the home improvements companies in Maryland are specialized in bathroom vanity installations. Some of the materials which help in the renovation of the bathroom are as follows: The Showers and tubs used are the latest ones with some of the latest decorations available. Most of the modern showers are really marvelous to look at. The sinks used which are designed with the variety of materials used and most of the latest sinks can be seen in the present bathrooms of Maryland. The Hair dryer installation can also be seen in some of the modern day bathroom and some of the mostly used sinks are the porcelain sinks. The vanity installations in the bathroom are available in a variety which includes single vanity, double vanity and some of the other bath vanity ideas. Thus, it can be seen that most of the residents in Maryland are extremely passionate to renovate their bathrooms and they have been successful in most of their plans with some of the experienced technicians. The installation procedures of the materials in the bathroom have been so smooth that the clients are heavily impressed with the working culture of the workers. Some of the latest tips which are followed in order to have the best bathroom are as follows: The durable flooring should be selected in order to give the bathroom a new look. Some of the durable tiles are the marble, stone and ceramic tiles. Some of the floors used are the well sealed hardwood floors. A stylish mirror should be hanged in the bathroom which can even increase the glow of the bathrooms. There should be an interior depth in the cabinet and in most of the bathrooms it can be seen that people use pedestal sink with graceful lines. Before purchasing a bathtub it should be thoroughly examined by the customers. Hence, it can be said that most of the bathrooms are renovated such that the house owners can have a pleasant time in the bathrooms and they can really have a good bath. Thus a perfect bathroom can be obtained with some of the remodeling processes which are followed by most of the home improvement companies.

The author is completely aware of the bathroom renovation MD companies and the bathroom vanity installations are the major contributions of the workers. The Author has explained properly all the renovation mechanisms of the bathroom which are essential for any of the customers. Hence, along with the kitchen it is the bathroom which give a perfect interior decoration.

The Future Is Bright For High Density Polyethylene Outdoor Furniture

Furniture made from recycled plastics is gaining prominence in the outdoor furniture industry. Recent advancements in manufacturing the material have made it a feasible alternative to what is traditionally used.

High density polyethylene or HDPE is a material derived from the number 2 type of recycled plastic. The most common container is the gallon milk jug. They are those semi-white jugs that you can see through a little. They are not the material used for solid white containers or the clear 2-liter bottles.

One form of HDPE that has come onto the market is called Polywood. It essentially is plastic lumber produced from type 2 waste recovered from recycling centers. Polywood is actually heavier and stronger than lumber cut from wood. First, the recycled plastic is crushed into pellets and then melted in a pot. Next, ultra-violet substances and color are added. This gives HDPE a huge advantage over traditional wood lumber. The liquid is then cured in molds shaped to normal sizes of lumber. The final product has a grain finish instead of having a smooth polished feel. I expect this material will soon be sold side by side with wood lumber in the home improvement chain stores.

The advantages of high density polyethylene furniture are numerous. First off, this recycled material is environmental friendly. No new plastic material has been introduced to the environment. The plastic has been saved from dumping into the ground and trees are saved from being cut down to make this furniture. Green alternative technologies are becoming a staple in many industries.

HDPE can handle the outdoor elements over time better than wood furniture. Sun, rain, and snow do not degrade high density polyethylene lumber. Insects and termites cannot eat away Polywood lumber. This furniture handles water over time without rotting and mildewing. Polywood furniture is an excellent choice for pool furniture at hotels and homes. In summary, high density polyethylene furniture will last a lot longer than wooden furniture.

Since Polywood lumber has solid color throughout, there is never a need to paint or stain it. The ultra-violet protection added will not allow the furniture to fade from sun exposure over the years. Polywood furniture needs only wipe down cleaning. It is very easy maintenance.

Finally, a great advantage to HDPE lumber is its high tensile strength. It is heavier and stronger than wood yet because it is plastic, there is a slight flexibility to it that makes it more comfortable than wood. Even though wood is somewhat flexible, it tends to warp permanently in one direction or another. Polywood flexes to the shape of a person’s body but springs back when they rise for sitting on it. Wood will crack, splinter, and shear much easier as well.

Next time you are in the market for outdoor furniture, consider buying high density polyethylene pieces. Do not mistake it for the cheap plastic furniture currently prevalent in the stores. HDPE is high quality plastic furniture and one day soon may take over as the top selling material for outdoor use.