How You Can Do the Garbage Bag Airflow Test

Nothing beats the coziness of your own home especially during those cold, winter nights. But when you’re freezing in it despite having a furnace then there’s a problem. A good way to check if poor air flow is the concern is to use the garbage bag airflow test.

One of the most common issues with heating and cooling equipment is poor air flow. This problem makes your heating and cooling equipment work like inefficient outdated models and this can waste a lot of your money. The two most common reasons for poor air flow: inadequate duct sizing and a dirty return air filter.

Inadequate Duct Sizing Inadequate duct sizing is usually the result of a poor installation by a contractor who might possibly not have the qualifications to perform proper sizing. This is a very common problem that a homeowner may battle for years to come and could cost thousands of dollars over the life of the equipment. It is extremely crucial that you get references before choosing a contractor.

A Dirty Return Air Filter A dirty return air filter is the easiest problem to fix. Simply change your return air conditioning filter more frequently or utilize a filter that does not restrict air flow. This simple change can lead to huge savings. How You Can Perform the Garbage Bag Air flow Test

Garbage bag airflow test is one of the easiest and cheapest methods to determine the air flow of your furnace registers, bathroom exhaust fan or clothes dryer exhaust. It’s a vital test to pinpoint the reason why your furnace isn’t providing sufficient warm air in your room. This is also important in order to determine whether your newly purchased exhaust is working at its best. The same goes when you’re having major renovations in your home that call for a change in your heating or cooling systems. It’s the cheapest way to check your furnace register and exhaust fans performance as it only requires a garbage bag. This test isn’t a precise measurement of the airflow but it is better than not conducting any test at all.

Here’s how to do the garbage bag airflow test:

1. Secure the mouth of the garbage bag using a tape right into a bent coat hanger or to a cardboard in order to keep it open.

2. Be sure to deflate the bag by crushing it flat.

3. Position the open part of the bag (mouth) over the furnace register or exhaust hood.

4. Using a stopwatch or any gadget track the number of seconds it takes for the bag to fully inflate.

If you’re using a small garbage bag that measures 66 x 91 cm, you should use the information below to determine the airflow:

Inflation time = Airflow

*2 seconds = 35L/s (75 cfm)

*4 seconds = 20 L/s (40 cfm)

*10 seconds = 10 L/s (20 cfm)

However, if you’re using a bigger garbage bag that measures 79 x 119 cm, use this data:

Inflation time = Airlfow

*2 seconds = 100 L/s (210 cfm)

*4 seconds = 50 L/s (105 cfm)

Self Storage Buildings – Why Steel Structures Are The Best

Self storage buildings made of steel offer benefits to owners as well as customers. More and more people are discovering the cost effectiveness, sturdiness, and eco-friendliness of car storage, boat storage, furniture storage, garage storage, and RV storage facilities built of steel.

Owners

Setting up a self storage business is easy. You can easily find a business loan because this is seen as lucrative, low risk business. Self storage buildings of steel are cheap and easy to construct. You need to invest little, and the returns are high. Business is booming because more and more people understand the advantages of self storage. Therefore, occupancy is high at all times. What is more, self storage is seen as a recession resistant business. People might stop buying homes, but they will always need extra storage space.

Cost of steel self storage buildings is as much as 60% lower than concrete buildings. Steel is weather proof, fire proof, and corrosion resistant. It does not encourage growth of pests and mold. Steel self storage buildings can be easily constructed and expanded. These buildings are low on maintenance. The surface can be painted in attractive colors to resemble concrete, brick, or stone. The cost benefits of steel buildings are passed on to customers.

Customers

If you are looking for extra storage space, a self storage warehouse may be the best answer for your needs. Storage warehouses are safe, fireproof, and pest resistant. Most self storage buildings have foolproof security arrangements such as 24/7 guards, swipe card keys, and fire alarms.

Many steel self storage buildings are constructed from recycled steel. This makes them ecofriendly and acts as an added incentive for environment conscious customers. Self storage can be used for all occasions whenever a little extra space is desirable – for de-cluttering homes, storing inventory and documents, or during relocation.

Homeowners use self storage warehouse during home renovations. The storage facility can hold their belongings until renovations are complete. Moving storage services offer portable storage containers that are delivered to the customer. They can put their belongings in the container and have it sent to the moving and storage facility or to their new destination. Moving storage services offer discounts for storage if customers use their moving service.

Self storage warehouses are located all across the US. Therefore, finding one close to your location is not very difficult. You can select storage units or portable containers from a range of sizes. This helps you save on costs, because rental rates depend on size of the container and facilities such as round-the-clock security, post-business-hours access, and climate control.

Self storage buildings can accommodate every type of item, from large boats, bulky furniture, and heavy home appliances and business equipment to delicate electronic equipment, CDs, documents, and antiques. Steel structures offer additional security to customers and maintenance-free ownership to proprietors.

Polyurethane Foam Roofing

Every house needs a sturdy roof. It protects people from all kinds of weather conditions. It keeps unwanted things out of the house. A good roof on your head means you have a shelter above you. When constructing a house, it is important to choose the best material for the roofing. You would want the roof to be strong and well insulated. The desired roofing material available in the market ranges from brick and cement, roof tiles and roof marble to wood, stone and metal. The newest addition to this list is the polyurethane foam.

We all know that modern science has put a great impact on our lives. It has changed the way we go about our routine much to our benefit. Its new inventions are a source of comfort and usefulness for all. Polyurethane is also one of the greatest innovations of modern science. It is an organic molecule which exists in the form of a polymer. Its structure is highly flexible and hydrophobic (water resistant). It is used in making foam seats, insulation panels, surface coatings and hard plastic parts. Polyurethane is chemically inert which means it does not react with any chemicals. All these characteristics make polyurethane an ideal substance for roofing purposes.

Atmospherically speaking, traditional roofing is not adequate enough to handle the rough situations we face today anymore. With the development in the architecture industry, new and improved options to create a strengthened and well equipped roof are emerging. Polyurethane foam roofing is a good choice to consider. It acts as an insulator and looks sophisticated. Polyurethane roofs are bright, smooth and flawless. They will make your house look more elegant and colorful.

The major benefit of using polyurethane foam in roofing is that it is a thermal insulator and is highly water resistant. The main problem people used to face with traditional roofing was that it allowed heat to enter in the house. Also, after a heavy downpour, the roofs used to leak. Polyurethane foam does not let any heat to pass through which keeps the house much cooler in summers and well heated in the winters. It also does not let any water to seep through it, keeping the inside ceiling of the house dry. Polyurethane foam keeps heating and cooling costs at a minimum.

Polyurethane foam used in roofs in lighter in weight as compared to roofing tiles, marble or wood. Furthermore, it is an elastic and flexible material which can withstand more than normal expansion and contraction without being deformed. This also renders the foam to be quite versatile in application. It can be bent, shaped and used over all kinds of roofs.

Tiles and marble may crack if exposed to severe weather conditions. Wood panels may also start disintegrating since they absorb the water and swell. Pests might also attack the wood, making holes in it. Under such circumstances, polyurethane is a better choice. It is not susceptible to any pest attack and can bear extreme weathers easily. Although it may seem a little expensive, polyurethane foam roofing turns out to be very cost effective in the long run.

Do You Know What to do About Your Roof Problems

How long a roof will last is dependent on several controllable factors. The lifespan of a house-top can be extended or reduced depending on the way it is maintained by the homeowner; however, it is a fact that no matter how well it is cared for, at some point the material will deteriorate and risk structure failure. Common signs of structural roof problems include: the presence of granulation; broken shingles; and slipping or cracked shingles. All of this if not detected at an early stage could allow water to penetrate the structure and cause severe damage and premature failure of the entire roof. This top covering of the house is very susceptible to leaking; therefore, homeowners should always practice preventive maintenance and prevent any leaks from starting.

Inspections

Any damage to the integrity of the structure itself can cause susceptibility to water leakage and decay. It is vital to thoroughly inspect the house-top before any major damage occurs. Start the inspection by first checking the interior ceilings for signs of water penetration; this may come in the form of a coffee-colored stain on the ceiling or surrounding walls. Continue the inspection outside by going onto the house-top to check for any indication of structural damage. Look for missing, cracked or loose shingles, granulation, and debris accumulation.

Repairs

After conducting a thorough assessment of this top part of the house and discovering there is a problem with the structure that may require repairs, a homeowner needs to make a decision about the next step. It must be decided if an expert from a roof company is needed to perform the job or if they can make the repairs on their own. It is fairly easy for a homeowner to make minor repairs provided they have adequate knowledge regarding how to perform any required repairs.

Water Leakage

Once water staining has been observed, a leak should be suspected. The first action homeowners should take is to locate the point of water penetration. After locating this spot, a nail should be hammered into the area of the leak. The homeowner should then go outside to look for the area on the roof that needs to be repaired. If the seepage has been caused by loose flashing around a chimney or vent, all that needs to happen is to tighten the flashing with rust-resistant screws. If the cause of the leak is due to damaged shingles, the damaged shingle must be removed and replaced with a new one, ensuring that the replacement tab is larger than the damaged tab. The homeowner must remember to put roofing cement over all nail heads to secure a tight seal.

Cleaning

Sometimes a problem may be caused by the accumulation of debris on the roof or because of an algae infestation. Dark staining on the roof caused by algae can be removed simply by making a bleach solution and spraying it onto the affected area. The solution needs to soak on the area where it has been applied for 15 to 30 minutes before using a soft bristle brush to scrub off the wet section of the roof. Then, the area should be thoroughly rinsed with clear water. Remove pine needles, leaves and twigs from any area that might cause water to back up. Be sure that down-spouts are properly working.

The Advantages and Disadvantages of Push-fit Fittings

Different Types of Plumbing Fittings
– In the UK there are two ways in which most plumbing is done, the first and most common is done with copper pipe and fittings, the other is the newer plastic push fit system. The copper pipe and fittings has come under scrutiny recently as the joining of the copper pipes is increasingly
difficult as it is often time consuming and awkward due to the fact that copper pipe is often supplied in straight lengths meaning that it needs
to be joined or bent when ever a change of direction occurs. Plastics on the other hand, like that of the push fit system helps to eradicate this awkwardness. Push fit gives you a simple and easy way to make a joint without losing reliability and can be straightforwardly broken down and reassembled.

Advantages of Push-fit
– Plastic pipe is flexible; it is able to bend in a non-linear fashion. Copper piping has limited flexibility.
Plastic piping will not burst. Copper piping has a tendency to freeze and burst leaving huge amounts of damage making it harder to introduce this into
cold areas like cellars. Very much in contrast to plastic pipe.
Due to its flexibility plastic pipe can be pushed thought holes in joists rather than being laid in notches. This is not realistic with copper piping
as it is hard to get the holes in line.
Push fit systems can also be used with copper pipe when so desired as it is very adaptable.

Disadvantages of Push-Fit
– Due to its flexibility the plastic pipe will not support its own weight. This is will not jeopardize its ability to work however, but it would be difficult to poke a bent pipe through a hole in floor boards.
Plastic pipe cannot come into contact with anything that is very hot, for example a boiler. If in contact with a boiler there is a possibility that it could melt therefore it is advised that metal pipe work is used for the first few feet.
Aesthetically the plastic pipes are bigger and less attractive than its copper counter parts.
Plastic pipes and fittings are pricier than their competitor copper.

Availability
– Like that of the copper piping, plastic piping is available in both 15mm and 22mm diameter. They are available in a wide range of accessories
including: straight, right angled and Tee couplings. Washing machine taps, tap connectors, in-line stopcocks, one-way valves, stop ends and tank connectors.

Useful Suggestions
– If you don’t normally use plastic fittings it is certainly worth keeping some around, especially in the winter. If a pipe bursts you will be able to fix the problem in a matter of minutes and the effects will be long lasting.

Important Steps to Take for Hail Damage on Your Roof!

A roof is very susceptible to hail damage from a storm. When such strong weather happens, it can create a minimal to severe loss. The impact may cause: dents; holes; pockmarked paint; chipped or split tiles; and granular loss. Several subsequent symptoms may appear that strongly suggest that such damage has occurred.

One way to avoid spending too much money for repairs if the housetop is damaged from a storm is to have homeowners insurance that will handle necessary repairs and replacement. If the structure is insured, a claim can be filed and the insurance company will send an estimator to assess the extent of the damage.

The housetop must be inspected by a trained and experienced estimator to be sure that all the loss is properly noted. Even if the inspector only finds minimal damage, an insurance claim should still be filed with the insurance company.

Following are indications of major hail damage:

Dents and Pits – This is major evidence of storm devastation. It may differ based on the angle of the structure. When hail strikes, flat housetops may have deeper dents compared to pitched ones. The appearance of damage will be greater on metal roofing than on asphalt shingles or slate.

Paint Disturbance – Some housetop materials are painted with different colors for beautification purposes. If hail hits this material, it may cause flaking of the paint which can lead to pockmarks. These marks are very unattractive and cause a very negative impression of the entire roof appearance even if the damage is not that severe.

Granular Loss – The most commonly used material on roofs is asphalt shingles. After a hail storm, this type of material will sometimes develop granular loss. If this happens, nail heads will begin to show and this could be the start of a leaking roof. The difference between normal granular loss and severe weather destruction is the shape. Normal wear and tear has a uniform granular loss while hail impact is circular and more localized.

Damaged Wood and Tile – Hail size may range from approximately pea size up to softball or grapefruit size. Because of this, the power with which it strikes a surface can contribute to severe damage to the roofing materials. This frozen water form that falls on the housetop may chip, fracture, scratch, and split wood or tile shingles.

Knowing the indications of hail damage is vital in determining a plan of action to address the roofing systems need for repairs or replacement. If these indications are observed during an initial assessment, the homeowner should check their insurance policy to ensure that they carry property damage coverage and then file a homeowners claim. After taking this initial step, a roofing contractor should be called to also examine the roof and prepare an estimate of any destruction related to the hail storm. Under most circumstances, insurance companies prefer to make their own estimates and will send an estimator to prepare a detailed appraisal of the related storm loss.

Roofing Contractors in Nova Scotia

Keeping the home well maintained and cared for at all times is known to be a process filled with stresses and complications of all kinds. There are usually many facets of this process that can become overwhelming for anyone involved as well as being very expensive in varied degree. People considering this process should know what to consider when choosing a great roofing company Nova Scotia to ensure they gain as much from this process as possible.

Roofs are known to serve an integral source of function and appeal for anyone involved with it today. This is the portion of the home that creates protection from the outside elements along with the structural integrity for the remainder of the structure. Issues that are found in this segment of the house should be left to a professional to address.

The entire Nova Scotia is currently home to quite a few companies that are trained and skilled in this area of the maintenance. This is known to provide a significant amount of variety as well as complication which should all be sorted through successfully. Factoring in a few key components helps ensure that a great choice is ultimately made.

A very noted consideration in going through with this choice is making sure the business performs a free consultation. Consultations are always crucial in that it determines the issue and what is required for repairs. This should be offered at reduced fees to the owner.

The business being considered should also offer all materials that are required for the project at a discounted rate. Most supplies that are necessary for repairs are reputed to be very costly when added up. Make sure those being considered offer wholesale discounts whenever possible.

If You have already found a roofing contractor that you feel is dependable, fair and qualified and have negotiated what you think is a fair price. It’s time to sign the agreement for the work to start.

Wait! Before you agree to anything you want to go over five things with your contractor. Trust me, taking a little extra time and checking these details will save you a lot of headache in the future.

Do Not Pay the Total Amount Up Front

It is smart to pay in stages as the work progresses. If you pay in advance you might never see the guys again (worst case scenario but it happens).

Split it up in three stages. As one phase has been created you give them a portion of the total cost of the roof. Of course it is standard practice for them to get 30% up front to pay for materials and supplies.

Make Sure Quality Materials Are Being Used

You are paying a lot for a new roof and you need to make sure quality materials that will hold up are being used. Many times a roofing company will be able to offer a lower bid because they are using inferior materials. A good installation with quality materials will equal a roof that lasts 20 years but using inferior materials could half that lifespan.

Are They Doing the Work or Subcontracting It Out

You want to find out who will be coming to your home. If there is a problem will you be speaking with another company who was hired by the general contractor or the actual people you signed the contract with.

Ideally you do not want a subcontractor doing the work. The whole chain of command is messed up. If you have a problem, for any reason, with the people doing work at your home you do not know who to call. Everyone will say they are not the ones in charge and pass the blame.

Payment Terms

Here is a suggestion. Pay for your new roof with your credit card so that you can get air miles. A typical rewards ticket cost 25,000 miles so a new roof will get you close. The problem is that many contractors do not take credit cards because they do not want to absorb the 2% fee they are charged.

Nevertheless, if they allow it I would do it that way. If not then I would recommend you pay with a post- dated check.

Finally, a roofing company Nova Scotia should only be chosen based upon pricing. Many professionals charge high hourly rates plus the cost of supplies. Seek out professionals that combine and discount these rates whenever possible.

What Are Fireplace Mantel Plinths

Plinths are square block bases traditionally made from stone used as a support for columns of your building and also have existed for years and years ago. They are known to decorate houses of royalty and still widely used even as much as today.

Really should be fact, plinths today are prevalently used not only as bases for statues, pedestals or monuments but you are also employed in many homes to frame doors, windows, cabinets, and fireplaces in order to name just a few, adding some personal touch to ones home interiors.

Generally employed for aesthetic purposes, plinth blocks now are often made available in a variety of materials which range from plaster, concrete, brick, stone, and wood. Those manufactured from wood can be used to trim a door, window, or fireplace are available in lots of wood types like white pine, poplar, oak, mahogany, maple, and cherry. They may be finished, or unfinished, painted or hand carved and are available in a number of designs that may range from intricate carvings with classic patterns to easy and more functional types.

Regarding a fire, a wooden plinth is directly placed directly under either side of the fireplace mantel to serve as footstalls particularly when the inside height of one’s mantel piece needs to be augmented. This technique usually intends to bring more focus on the mantels framing your fireplace; to offer the space a particular appearance brought about by the design of the fireplace mantel. Sold in pairs, most if not completely fireplace mantel plinths currently available are available in pre-cast and ready for installation. More popular types include pearl mantels, mission oak, medium oak, distressed medium oak and cherry finished. Price tags average from $100- $200.

To learn which plinth pair is simply befitting your mantel, you have to measure the “outside leg to outside leg” measurements and you less the interior opening and divide it by 2 to get the width of every leg. You can definitely you aren’t sure relating to this, you might need an expert to measure them for you personally. Though doable for installation, you may want to hire a specialist or observe security precautions when installing.

Metal Roofing—Crush the Myths that Clout Your Judgment

Your home is a comfy shelter for you. Be it the scorching heat, heavy shower or raining of snow, the roof of the house spreads the safest canopy overhead. The beauty of the roof adds a new dimension to the charm of the entire building. If an eye for beauty is the must-have quality to enhance the appeal of the roof, then using the high-quality materials is equally important to ensure its longevity. If you are residing in south Florida, then any roofing expert will suggest the proper roofing technique and materials in perfect sync with the atmospheric condition of the state which is known to be prone to the violent slap of the hurricanes. If you grip the importance of a variety of roofing techniques, then you will understand how much it is essential to hire the service of the south Florida roofing company for your benefit.

Metal roofing: An Introduction
The advanced research in the field of architecture has made it clear that although the function of the roof is same throughout the entire globe but its compositions should vary a lot in sync with the change in the climatic condition. The concepts of implementing the various roofing techniques came tumbling after once the necessity of choosing the different materials for roof building was understood. Metal roofing was not a new concept but only confined to the commercial buildings. It is still regarded as the most unattractive metallic covering which mars the appearance of the house. The metal roofing has evolved a lot in the last decade and is used in case of the residential roofing too.

Metal roofing: Myths and Reality
There is an array of myths regarding the metal roofing which may push you in dilemma over making the right move. The final judgment rests on you, so you should be familiar with the pros and cons of such type of roofing. As south Florida is often invaded by the deadlier storms, so embracing the metal roofing technique is imperative to withstand such extreme conditions. The metal roof reflects the sunrays thereby building up a cool ambience inside a home. So having a metal roof overhead is a way to reduce the soaring electric bill in the summer season. Metal is not a combustible material. So it does not catch fire easily. Moreover, it dissipates the electric charge if the house catches electricity in times of thundering or any other time. The myths regarding the metal roofing does not end here but it is just a mere starting. The cynics argue that it will not take much time to build up a layer of rust upon the surface of the metal roof. But in reality, a thick coating, made of amalgamated metals is laid upon the exposed surface of the metal roof to prevent any form of rusting. It is further coated with the high-quality paint.
Metal Roofing: Cost Criteria
The homeowners must have to bear the burden of the exorbitant cost if they opt for the metal roofing. But such costly investment will benefit them in the long run. The monetary sacrifice that you make at present will pay for the upfront cost in the future. In case, you wish to know more about the metal roof, consult any reputable south Florida roofing company.

You Have a Roofing Estimate, Now What

Calling contractors and asking for estimates is the easy part; now you need to compare the estimates you received. Always ask for a detailed estimate in writing . It is impossible to make an informed decision if you are not given all of the information. Before you begin your review of the written estimates, call the Contractor references of past customers and have your notes from the ensuing conversation handy as you review each estimate.

Although the bottom line is important, never compare estimates only by the overall cost . As you review your estimate, here are some of the questions you should be asking yourself:

Review Your Roofing Estimate and compare material price vs quality. If the estimate does not contain a detailed breakdown of materials and labor, call the contractor and ask for this information. To bring in the lowest bid, your contractor may have priced your project using a lower quality roofing product which could impact the lifespan of your roof. It is always necessary to weigh the benefits of quality versus price when you are reading estimates. It may be worthwhile in the long run to pay extra now and save hassle a few years down the road.

Also pay close attention to the type of insulation and sealants that are budgeted for your project. Although the cost differential is not high between a thinner insulation product and one with more layers, the quality of the product will directly affect your costs after the roof is installed. If you use a thicker insulation, the amount of heat or cold that seeps into your home will be significantly lessened, thus lowering the amount you will be paying for air conditioning or heat.

Although it is not recommended that you climb up on your roof to measure and determine the amount of material needed, look closely at the estimate from your contractor to make sure they are bidding the correct amount of material. If the contractor has never measured your roof, but offers a decisive amount of materials to be used, ask him to justify his number. Be sure that you are paying for the amount of material you need , and not material that will never be used, or not enough material to complete the job thus running up significant unexpected costs.

If the amount budgeted for labor and “pass-through” costs such as the transportation of materials seems high, dig deeper and determine where the cost comes from. A good contractor will often charge a bit more for labor because he has the extra cost of providing training and salary to quality workmen, but be careful because oftentimes higher cost will equal a higher profit margin for the contractor and not better quality for you.

Ask for customer references and understand the responses you receive from the customer references carefully; these are the people who were so pleased with the contractor they were happy to have their name given as a reference. Have your list of questions handy when you interview a reference, and take notes of their answers.

Take detailed notes as you review each estimate, listing your questions and summarizing the overall bid and response from the customer references for each contractor. Once you finish a detailed review of each estimate, take your notes and compare the estimates . Only then will you be able to get a true comparison of what is being offered.