Your Own Laminate Flooring Project
Installing a new flooring system on your house can be a challenging and expensive experience depending on the type of flooring material that you would have. For the adventurous, however, installing a flooring system is something that can be taken on as their own project instead hiring installation companies. How is this possible? Well, for one, instructions are usually printed on the back of the laminates making it easy for you to do the whole installation by yourself.
Of course, before you can start any flooring installation project, you first have to get the laminate floor suited to your home. If possible go for a design that matches your house’s dcor or theme. Make sure that, when you head to the store, you already have with you your house’s floor area. This would help you determine how many laminates you have to buy.
As opposed to hardwood flooring wherein you have to wait some time before you can actually install the flooring, laminate flooring needs to be installed as soon as you open the package. Of course, you have to make sure that the planks that you have are not defective ling before you install them. This is because, once installed, you cannot have them refunded.
When installing laminate flooring in Los Angeles homes, make sure that you do not install and then take them out and then re-install the planks if you are having a hard time making them fit. This can damage the laminates. The best way to go about this is to try putting them together before having them installed. That way, you already have an idea which pieces go together.
As opposed to hardwood flooring, installing laminate floorings in the kitchen area, the cabinets should already be in place. With laminate flooring Los Angeles homes usually have, you would need to learn how to install the planks around the cabinets. This means that you should have a saw ready with you to help you cut the planks into manageable sizes.
Lastly, if you would have to place the laminate flooring Los Angeles homes usually have around pipes, your best move would be to drill a hole in the plank measuring to half an inch larger than the circumference of the pipe. Cut them up through the center of the hole, install them, and then glue the two parts together.